Summary: We examine the program development environment in which we will work for most of the semester.
Disclaimer: For this reading and the next, we have a bit of a “chicken and egg problem”. That is, it's difficult to introduce the environment in which you will write algorithms without first introducing the language in which you will write those algorithms. At the same time, you cannot start learning the language until you've learned a bit about the environment. In this reading, we will emphasize the environment, but teach you a bit about the language, too. In the paired reading, we'll teach you more about the language, but also a little bit about the environment. The lab should teach you a bit about both.
One of the main activities of many computer scientists is that of programming, expressing algorithms in a form understandable to the computer. (Even computer scientists who emphasize other issues often end up needing to build programs to help support arguments or to provide concrete evidence for theories.) Much of this semester, you will be writing programs as a way of learning about important concepts. Programming is also a skill that you can apply in a variety of contexts.
At this point, most programmers develop their code in what is called an program-development environment. Program-development environments let you write code, test bits of the code, format your code for easy readability, obtain documentation on built-in procedures, and so on and so forth.
In this class, we will use a program-development environment called MediaScript. MediaScript is an environment developed by a group of students and faculty at Grinnell. The primary goal of MediaScript is to support interactive scripting in Scheme. It is also designed to make it a bit easier for novices, and takes some user interface design from DrScheme, the program development environment we previously used at Grinnell. In this class, you will use a version of MediaScript that works within the GIMP.
Because MediaScript is a plug-in for the GIMP, you can only start it through the GIMP. As you may recall, you start the GIMP by clicking on the icon that you selected in the introductory Linux Lab. If you have no such icon, find a teaching assistant or teacher for help.
Once you're started the GIMP, you started MediaScript by selecting themenu, then the menu item, and finally, .
You will find that MediaScript has many similarities to most applications, including anthat supports operations like cut and paste. You may, however, notice that MediaScript has a primary window that looks somewhat different than other programs.
As you'll note, that window has three panes. The top pane is called the Definitions Pane, the middle pane is called the Log Pane, and the bottom pane is called the Interactions Pane. As the names suggest, the top pane is used for writing definitions (more on those later), the bottom pane is used for your primary interactions with MediaScript, and the middle pane keeps a log of your interactions. (As you read through the materials for the course, you'll note that we format text you enter in the interactions pane and text you enter in the definitions pane slightly differently.)
We will start by exploring the interactions pane. For you initial use of MediaScript, you can treat the interactions pane as a fancy calculator. That is, you'll enter expressions and it will respond with the values of those expressions. For example, you can ask it to add 3 and 4, or to find the square root of 144.
The expressions you write in the interactions pane have to use the syntax of the Scheme programming language. Scheme uses a consistent syntax that makes a lot of sense to the computer, but that takes a bit for humans to master. (Fortunately, Scheme's syntax is much simpler than that of almost any other computer language.)
Here are the two key points to remember when writing Scheme expressions:
(+ 3 4)rather than the more traditional
3 + 4.
Why does Scheme use these two key ideas? Parentheses help
Scheme resolve potentially ambiguities. For example, you'll note that
different calculators compute different results for
depending on whether or not they are designed to accommodate precedence.
In Scheme, since you must parenthesize every subexpression, you must
(+ 3 (* 4 5)) or
(* (+ 3 4) 5).
Each expression indicates precisely what you want computed.
Prefix order, on the other hand, is intended to make life easier for
the programmer. In particular, in languages in which some operations
appear before their operands (such as
sqrt) and others
appear between their operands (such as
modulo), programmers must remember or look up the order to use
for each operation. In Scheme, there's never a question, because
you always put the operation first.
When MediaScript is ready for you to type an expression in the pane, it prints a greater-than sign (also known as a right angle bracket). You type an expression you want evaluated and then hit the Return key. If you have not closed all the open parentheses, it will let you type more on the next line. Once you have completed an expression, it will evaluate it and present the result.
(+ 3 4)
(string-append "Hello" " " "Sam")
While the first two expressions are numeric, the last shows that MediaScript can work with words, too. (As long as those words are enclosed in non-curly quotation marks.)
At times, you will find that you made a small typo in a long expression. For example, in computing the average of the grades 89, 66, 79, 85, 100, and 91, you might write
(/ (+ 89 66 79 85 100 91) 5)
The result suggests, of course, that there was an error in the expression. (After all, the average of grades that are all 100 or less should not be more than 100.) A bit of analysis suggests that you really wanted to divide by 6, rather than 5. What can you do? You can retype the whole expression, but that takes a bit of time and gives you an opportunity to mistype something. You can cut and paste, and then edit the 5 (using the arrow keys and the backspace or delete keys).
Alternately, you can take advantage of MediaScript's Command History. MediaScript lets you scan through the previous expressions entered. To back up in the command history, press the up arrow key on the keyboard. To move forward, press the down arrow key.
We've seen what the interactions pane is for, so what should we use
definitions pane for? The simplest use is to assign names to values to
make it easier to write our expressions. For example, if we wanted to
work with grades on six homework assignments, we might name the grade
on the first assignment
grade1, the grade on the second
grade2, and so on and so forth. That way,
the expression to compute the average grade would be the clearer
>(/ (+ grade1 grade2 grade3 grade4 grade5 grade6) 6)
In Scheme, we name values using the
operation, which we put in
the definitions pane.
(define grade1 89) (define grade2 66) (define grade3 79) (define grade4 85) (define grade5 100) (define grade6 91)
The definitions in the definitions pane are evaluated when you click thebutton. Once you've done so, you can use the names in the interactions window.
If you spend a bit of time naming values, you may find it useful to save those definitions into a file that you can then restore later. As you might guess, you save definitions using a menu item from the. Since you can gather text in both the definitions pane and the log, MediaScript provides both and (as well as a host of variations thereof). Since the definitions are more likely to be of permanent use than the log , the default is to save definitions.
The custom is to save Scheme files with a suffix of
.ss). If you do not provide a suffix,
MediaScript will provide one for you. (If you provide a suffix other
.ss, MediaScript will let you use
that suffix, but you may find it harder to work with the file.)
Once you have saved definitions, you can quit MediaScript, go off and do other work, and then restart DrScheme and reload the definitions. As you might expect, you can load old definitions by usingor from the menu.
If you end up creating lots of definitions files and want to use them
simultaneously (but don't need to edit them), there's a command you can
type in the interactions window to get definitions from a file rather
than from the definitions pane,
You need to put the name of the file in quotation marks. For example,
You have now learned enough to begin to interact with MediaScript. In a subsequent laboratory, we will ground these abstract instructions in concrete exercises.
Copyright (c) 2007-10 Janet Davis, Matthew Kluber, Samuel A. Rebelsky, and Jerod Weinman. (Selected materials copyright by John David Stone and Henry Walker and used by permission.)
This material is based upon work partially supported by the National Science Foundation under Grant No. CCLI-0633090. Any opinions, findings, and conclusions or recommendations expressed in this material are those of the author(s) and do not necessarily reflect the views of the National Science Foundation.
This work is licensed under a Creative Commons
Attribution-NonCommercial 2.5 License. To view a copy of this
or send a letter to Creative Commons, 543 Howard Street, 5th Floor,
San Francisco, California, 94105, USA.