Fundamentals of Computer Science I (CS151.02 2007S)
[Skip to Body]
Primary:
[Front Door]
[Syllabus]
[Glance]
[Search]

[Academic Honesty]
[Instructions]
Current:
[Outline]
[EBoard]
[Reading]
[Lab]
[Assignment]
Groupings:
[EBoards]
[Examples]
[Exams]
[Handouts]
[Homework]
[Labs]
[Outlines]
[Projects]
[Readings]
Reference:
[Scheme Report (R5RS)]
[Scheme Reference]
[DrScheme Manual]
Related Courses:
[CSC151 2006F (Rebelsky)]
[CSC151.01 2007S (Davis)]
[CSCS151 2005S (Stone)]
Summary: While Scheme excels at symbolic and list processing, it is also quite capable of doing numeric computation. Scheme provides a variety of procedures for dealing with a variety of categories of numbers. In this reading, we discuss the various numbers and related numeric operations.
Contents:
Computer scientists write algorithms for a variety of problems. Some types of computation, such as representation of knowledge, use symbols and lists. Others, such as the construction of Web pages, may involve the manipulation of strings (sequences of alphabetic characters). However, a significant amount of computation involves numeric computation, such as you might do with a calculator.
One advantage of doing numeric computation with a programming language, like Scheme, is that you can write your own algorithms to make the computer automate repetitive tasks. As you do numeric computation in any language, you must first discover what types of numbers the language supports (some languages support only integers, some only real numbers, some combinations) and what numeric operations the language supports. Fortunately, Scheme supports many types of numbers (as you may have discovered in the first few labs) and a wide variety of operations on those numbers.
Scheme treats numbers slightly differently depending on whether they are
integers (whole numbers), rational numbers (expressible
as a ratio of integers), real numbers (corresponding to points on
a number line), or complex numbers (corresponding to points on the
plane determined by a realnumber line and a perpendicular line for
imaginary numbers
, the square roots of negative numbers). From the
Scheme programmer's point of view, these categories of numbers are nested:
all integers also qualify as rational numbers (5 is the same thing as 5/1);
all rationals count as real numbers, and all real numbers as complex
numbers. Mathematically speaking, the converse inclusions do not
generally hold. (3/4 is rational but not an integer, the square root of 2
is real but not rational, and the square root of 1 is complex but not
real.)
Scheme supplies a predicate for each of these categories of numbers:
integer?
, rational?
, real?
, and
complex?
.
(You may recall that Scheme responds
#t
for yes
and #f
for no
.)
> (integer? 5) #t > (rational? 5) #t > (real? 5) #t > (complex? 5) #t > (integer? 3/4) #f > (rational? 3/4) #t > (real? 3/4) #t > (complex? 3/4) #t > (integer? (sqrt 1)) #f > (rational? (sqrt 1)) #f > (real? (sqrt 1)) #f > (complex? (sqrt 1)) #t
Within each of these categories of numbers, Scheme distinguishes between exact numbers, which are guaranteed to be calculated and stored internally with complete accuracy (no rounding off), and approximations, also called inexact numbers, which are stored internally in a form that conserves the computer's memory and permits faster computations, but allows small inaccuracies (and occasionally ones that are not so small) to creep in. Since there's no great advantage in obtaining an answer quickly if it may be incorrect, we shall avoid using approximations in this course, except when the data for our problems are themselves obtained by inexact processes of measurement.
To determine whether Scheme is representing a particular number exactly or
inexactly, use one of the predicates exact?
and
inexact?
.
> (exact? 5/9) #t > (exact? 13.2) #f > (inexact? 13.2) #t > (exact? (sqrt 2)) #f
DrScheme happens to store real numbers in such a way that any real number
that can be named or computed also counts as rational. For instance,
when DrScheme computes (sqrt 2)
, the value it returns is
an inexact approximation to the correct value, and it turns out that
DrScheme uses only rational numbers, even when the values it is trying
to approximate are irrational.
> (real? (sqrt 2)) #t > (rational? (sqrt 2)) #t > (integer? (sqrt 2)) #f
The standard language definition for Scheme says that an implementation of the language does not have to support all these categories of numbers; it would be legal, for instance, to leave out complex numbers or to treat all numeric values as inexact. However, most implementations (including DrScheme) support all the kinds of numbers described here.
The builtin Scheme procedure exact>inexact
takes an exact
number as its argument and returns an inexact approximation to it:
> 12/7 1 5/7 > (exact>inexact 12/7) 1.7142857142857142 > (exact? (exact>inexact 12/7)) #f
Since DrScheme uses fractional notation to print out exact numbers, but renders approximations as decimals, invoking this procedure is a simple way to determine the general format in which results are printed. As we'll see later in the semester, however, there are better ways that give the programmer finer control over the format.
The Scheme standard does not directly support the familiar category of natural numbers, but we can think of them as being just the same things as Scheme's exact nonnegative integers.
When you write a numeral into a Scheme program or type one in as part of a definition or command to the interactive interface, the structure of the numeral you type determines the category of the number represented.
One basic rule is that a numeral that contains a decimal point normally
stands for an approximation rather than an exact number. Scheme assumes
that you may have rounded off the last decimal place and takes this as
implicit permission to use a roundedoff representation. If you want
Scheme to interpret the numeral as an exact number, you can either convert
it to a fraction  for instance, changing 1.732
to
1732/1000
 or attach the exactness prefix
#e
at the beginning of the numeral, making it
#e1.732
.
Conversely, a number written such as a sequence of digits (possibly with a
sign at the beginning) or as a fraction normally stands for an exact
number. If you want an approximation instead, use an equivalent numeral
with a decimal point or attach the inexactness prefix
#i
. (So 23/70
is an exact number, but
#i23/70
is an approximation.)
Scheme permits the use of a version of scientific notation, in
which a real number is expressed as the product of some coefficient and
some integer power of 10. For instance, the numeral 3.17e8
denotes the real number three hundred and seventeen million  that is,
3.17 times ten to the eighth power. The part of the numeral that precedes
the e
is the coefficient; the part that follows indicates the
power of ten by which the coefficient should be multiplied. A number
expressed in scientific notation is also inexact unless the numeral is
preceded by the
exactness prefix. DrScheme uses scientific notation when printing out
an approximation if its absolute value is either very large or very small,
but it never uses scientific notation when printing out an exact number.
Section 6.2.5 of the Revised^{5} report on the algorithmic language Scheme lists Scheme's primitive procedures for numbers. Read through the list at this point to get a feel for what Scheme supports. The following notes explain some of the subtler features of commonly used numerical procedures.
The addition and multiplication procedures, +
and *
,
accept any number of
arguments. You can, for instance, ask Scheme to imitate a cash register
with a command like this one:
> (+ 1.19
.43
.43
2.59
.89
1.39
5.19
.34
)
12.45
You can call the 
procedure or the /
procedure to operate on a single argument. The 
procedure returns the additive inverse of a single argument (its negative), the result of subtracting it from 0.
There are four procedures relating to division (/
,
quotient
, remainder
, and modulo
).
The /
procedure returns the multiplicative inverse of a
single argument (its reciprocal), the result of dividing 1 by it.
The quotient
and remainder
procedures apply only
to integers and perform the kind of division you learned in elementary
school, in which the quotient and the remainder are separated: Four
goes into thirteen three times with a remainder of one
:
> (quotient 13 4) 3 > (remainder 13 4) 1 > (quotient 1 2.5) quotient: expects type <integer> as 2nd argument, given: 2.5; other arguments were: 1
As the final example suggests, quotient
can only be applied
to integers. The /
procedure, on the other hand, can be
applied to numbers of any kind (except that you can't use zero as a
divisor) and yields a single result:
> (/ 13 4) 13/4 > (/ 1 2.5) 0.4
The modulo
procedure is like remainder
, except
that it always yields a result that has the same sign as the divisor. In
particular, this means that when the divisor is positive and the dividend
is negative, modulo
yields a positive (or zero) result.
> (remainder 13 4) 1 > (modulo 13 4) 3
There are five comparison predicates for comparing values,
<
(less than),
<=
(less than or equal to),
=
(equal to),
>=
(greater than or equal to),
and
>
(greater than). When given two arguments, they return
#t
if the indicated relation holds between the two arguments.
> (< 5 10) #t > (> 5 10) #f
These predicates and also take more than two arguments. The predicate
returns #t
only if the relation holds between each pair of adjacent
arguments.
The log
procedure, despite its name, computes natural
(base e) logarithms rather than common (base ten) logarithms. You can
convert a natural logarithm into a common logarithm by dividing it by
the natural logarithm of 10. In case you've forgotten, the common
logarithm of n is the power to which you raise 10 in order
to get n
.
> (log 100) 4.605170185988092 > (/ (log 100) (log 10)) 2.0
When using Scheme's trigonometric functions, which include
sin
, cosine
, and tan
, bear in
mind that all angles are measured in radians, not degrees.
> (sin 90) 0.8939966636005579 > (cos 90) 0.4480736161291701 > pi 3.141592653589793 > (exact? pi) #f > (sin (/ pi 2)) 1.0 > (cos (/ pi 2)) 6.123031769111886e17
You may wonder why the cosine of piover2 (a right angle) is not 0.
It's because pi
is not exactly the value of pi. However,
as scientific notation indicates, the value is pretty close to 0. (There
are sixteen leading 0's.)
http://www.cs.grinnell.edu/~rebelsky/Courses/CS151/History/Readings/numbers.html
.
[Skip to Body]
Primary:
[Front Door]
[Syllabus]
[Glance]
[Search]

[Academic Honesty]
[Instructions]
Current:
[Outline]
[EBoard]
[Reading]
[Lab]
[Assignment]
Groupings:
[EBoards]
[Examples]
[Exams]
[Handouts]
[Homework]
[Labs]
[Outlines]
[Projects]
[Readings]
Reference:
[Scheme Report (R5RS)]
[Scheme Reference]
[DrScheme Manual]
Related Courses:
[CSC151 2006F (Rebelsky)]
[CSC151.01 2007S (Davis)]
[CSCS151 2005S (Stone)]
Disclaimer:
I usually create these pages on the fly
, which means that I rarely
proofread them and they may contain bad grammar and incorrect details.
It also means that I tend to update them regularly (see the history for
more details). Feel free to contact me with any suggestions for changes.
This document was generated by
Siteweaver on Thu Sep 13 20:55:10 2007.
The source to the document was last modified on Mon Jan 29 08:46:29 2007.
This document may be found at http://www.cs.grinnell.edu/~rebelsky/Courses/CS151/2007S/Readings/numbers.html
.
You may wish to validate this document's HTML ; ;
Samuel A. Rebelsky, rebelsky@grinnell.eduhttp://creativecommons.org/licenses/bync/2.5/
or send a letter to Creative Commons, 543 Howard Street, 5th Floor,
San Francisco, California, 94105, USA.